HG Flexo has more to offer...

TechnicalData
Type
R-394
R-284
R-228
Thickness
3.94mm/155mil
2.84mm/122mil
2.28mm/90mil
Hardness (Shore A)
38¡À2
42¡À2 / 50¡À2
50¡À2
Recommended relief depth (mm)
1.8£­2.0
1.0£­1.4
1.0£­1.1
Tonal range
3£¥~ 95£¥
2£¥~98£¥
2£¥~98£¥
Reproduction range (line/inch)
100
120
133
Minimum positive line width (mm)
0.3
0.15
0.1
Minimum isolated dot diameter (mm)
0.5
0.2
0.15
Ink compatibility
¡Ìwater and alcohol-base ink
¡Áoil-based ink and ink containing more than 20£¥ ethyl acetate
Major applications
Corrugated,Paper
Carrier Bag(paper/plastic)
Maximum size available (mm)
1200x2032
1200x2032
1200x2032

Recommended Plate Making Parameters
Type
R-394
R-284
R-228
Back exposure (sec)
20-60
20-40
20-40
Main exposure (min)
5-20
5-20
5-20
Processing (min)
5-10
5-10
5-10
Drying (hr)
1.5-2
1.5-2
1.5-2
De-tack (min)
8-15
8-15
8-15
Post exposure (min)
3-5
3-5
3-5
*
 The parameters are for reference only.The optimal parameters must be determinde through testts
held for each plate making equipment.If further assistance is required,please contact us.

Storage Instructions
Storage-Raw plates
Unexposed plates should be stored in a cool area (4-32¡æ),away from heat.The plates must be kept flat and should not be exposed to direct sunlight.Exposure to high concentration of ozone must avoided.
Storage-Finished plates
Printing plates should be kept away from direct sunlight and excessive white light.Exposure to high concentration of ozone must be avoided.After printing,the plates must be cleaned with compatible solvent.
Shelf life
12 months under the recommended storage conditions.